EMC E20-335 training and testing

ITCertKing's EMC E20-335 exam training material is the best training materials on the Internet. It is the leader in all training materials. It not only can help you to pass the exam , you can also improve your knowledge and skills. Help you in your career in your advantage successfully. As long as you have the EMC E20-335 certification, you will be treated equally by all countries.

Whole ITCertKing's pertinence exercises about EMC certification E20-335 exam is very popular. ITCertKing's training materials can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam. Although EMC certification E20-335 exam is difficult, through doing ITCertKing's exercises you will be very confident for the exam. Be assured to choose ITCertKing efficient exercises right now, and you will do a full preparation for EMC certification E20-335 exam.

Selecting the products of ITCertKing which provide the latest and the most accurate information about EMC E20-335, your success is not far away.

After the advent of the ITCertKing's latest EMC certification E20-335 exam practice questions and answers, passing EMC certification E20-335 exam is no longer a dream of the IT staff. All of ITCertKing's practice questions and answers about EMC certification E20-335 exam have high quality and 95% similarity with the real exam questions. ITCertKing is worthful to choose. If you choose ITCertKing's products, you will be well prepared for EMC certification E20-335 exam and then successfully pass the exam.

Are you IT person? Do you want to succeed? If you want to succeed, please do to buy ITCertKing's EMC E20-335 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the ITCertKing's EMC E20-335 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? ITCertKing's EMC E20-335 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .

ITCertKing's experienced expert team has developed effective training program a for EMC certification E20-335 exam, which is very fit for candidates. ITCertKing provide you the high quality product, which can let you do simulation test before the real EMC certification E20-335 exam. So you can take a best preparation for the exam.

ITCertKing provide you the product with high quality and reliability. You can free download online part of ITCertKing's providing practice questions and answers about the EMC certification E20-335 exam as a try. After your trail I believe you will be very satisfied with our product. Such a good product which can help you pass the exam successfully, what are you waiting for? Please add it to your shopping cart.

Exam Code: E20-335
Exam Name: EMC (Symmetrix Solutions Specialist Exam for Implementation Engineers)
One year free update, No help, Full refund!
Total Q&A: 105 Questions and Answers
Last Update: 2013-10-26

E20-335 Free Demo Download: http://www.itcertking.com/E20-335_exam.html

NO.1 Refer to the exhibit
What is the correct state for the Standard and Rl-BCV prior to issuing a symreplicate start command?
A. Synchronized
B. Suspended
C. Split
D. Write-Enable
Answer: C

EMC test questions   E20-335 test answers   E20-335   E20-335 test questions   E20-335

NO.2 On the Symmetrix platform, which type of RAID protection ensures the best random write performance?
A. RAID 1
B. RAID S
C. RAID 6
D. RAID 5
Answer: A

EMC study guide   E20-335   E20-335 dumps   E20-335 questions   E20-335 exam simulations

NO.3 What is required to ensure the integrity of data on the R2 volume during a SRDF fallback operation?
A. Remove entries from the file system table
B. Stop any applications that are accessing the R2 volume
C. Disable journaling on the file system
D. Suspend the RDF link
Answer: B

EMC   E20-335   E20-335   E20-335 demo

NO.4 An SRDF failover has been executed during the testing phase of an implementation. What is the
expected status of the R1 and R2 devices after performing SRDF failover operation?
A. R1 and R2 Not Ready
B. R1 Wnte Disabled; R2 Read/Wnte
C. R1 Read/Wnte, R2 Read/Wnte
D. R1 Read/Wnte. R2 Wnte Disabled
Answer: Bhttp://www.scribd.com/doc/29541661/Srdf-Operations-white-Paper

NO.5 Which command is used to set or reset HBA port flags on Symmetric arrays running Enable 7.0
Enginuity 5874?
A. symcfg
B. symmask
C. symconfigure
D. symaccess
Answer: D

EMC pdf   E20-335   E20-335 test questions   E20-335 original questions

NO.6 Open Replicator pull will be used to move data between a third party array and a Symmetrix V-Max
array.
What is recommended before starting the Open Replicator session?
A. Ensure that the remote devices are Host read/write enabled
B. Ensure that the control devices are Not Ready
C. Ensure that the remote devices are Host inaccessible
D. Ensure that the control devices are Write Disabled
Answer: C

EMC   E20-335   E20-335 braindump

NO.7 You have been asked to create a configuration for a single engine Symmetric V-Max array with 8 DAEs
and 64 drivers. They would like to have the data devices with RAID 5(7+1) protection.
What would be the largest number of members you would recommend for a stripped metavolume.?
A. 4
B. 16
C. 8
D. 32
Answer: B

EMC   E20-335 braindump   E20-335   E20-335   E20-335 exam simulations

NO.8 Which file contains the parameter that can change the default behavior of SYMCLI operations, and
there control actions?
A. SYMCLI options File
B. SYMAPI Options File
C. SYMCLI Command File
D. SYMAPI Command File
Answer: B

EMC dumps   E20-335 certification training   E20-335 questions   E20-335 original questions

NO.9 What is recommended before creating a TimeFinder/Mirror replica?
A. Ensure that the production application using the source devices is shut down
B. Ensure that all writes from the production application using the source devices are paused!
C. Ensure that the BCVs are not being actively accessed
D. Set the BCVs to a Not Ready state
Answer: Chttp://www.scribd.com/doc/37352326/Emc-Study-2

NO.10 How does Delta Set Extension help in an SRDF/A deployment?
A. Reduces RPO
B. Reduces the amount of required cache
C. Improves response time
D. Absorbs bursts of host writes
Answer: D

EMC   E20-335   E20-335   E20-335

NO.11 In symmetric V-max series array running Enginuity 5874, which device is used as a pass-through
device for Auto provisioning?
A. VDEV
B. VCM
C. ACLX
D. SFS
Answer: C

EMC exam dumps   E20-335   E20-335 exam simulations

NO.12 Diagnostic messaging for the GNS daemon is written to which file?
A. /7SYMAPI/emc/storgnsd .log0
B. /SYMAPI/log/storgnsd.log0
C. /SYMAPl/usr/storgnsd log0
D. /SYMAPl/bin/storgnsd log0
Answer: B

EMC   E20-335   E20-335 dumps   E20-335 exam   E20-335 braindump

NO.13 Refer to the exhibit.
A database server has its logs stored on a volume on the log source Symmetrix V-Max array and its data
stored on a volume on the data source Symmetrix V-Max array. Both source Symmetrix V-Max array
frames replicate data to the target Symmetrix V-Max array at the Remote site. There are two device
groups that have been defined:
One group for the data volume on the Symmetrix containing the data LUNs
One group for the log volume on the Symmetrix containing the log LUNS
What happens if the SRDF inks between the Symmetrix contain the data LUNs and the target Symmetrix
were to fail?
A. The R2 data in the database remains consistent because Enginuity Consistency Assist (RDFECAJ
technology would ensure data consistency).
B. The data in the database becomes inconsistent at the Remote site.
C. An SRDF failover would be initiated on all volumes and processing will automatically be switched over
to the Remote site
D. The R2 volumes in the Symmetrix V-Max containing the log LUNs would become write-disabled to the
database server
Answer: C

EMC   E20-335 original questions   E20-335 certification training   E20-335

NO.14 Where is the volume Logix Database maintained starting with DMX-3?
A. VCM gatekeeper
B. Symmetrix logical Volume
C. Symmetrix File System
D. VCM database.
Answer: C

EMC   E20-335 exam dumps   E20-335   E20-335 exam

NO.15 One of the requirements, during an Open Replicator implementation is that production application
should not be implemented by open Replication session. An analysis of the control Symmetrix showed
that FA ports are currently 70% utilized. How should pace and ceiling be configured?
A. Pace should be set to 0 and Ceiling should be left at the default
B. Pace should be left at the default and Ceiling set to 30
C. Pace should be left at the default and Ceiling set to 100
D. Pace should be set to 9 and Ceiling should be set to 70
Answer: B

EMC original questions   E20-335 dumps   E20-335 exam   E20-335 test questions

ITCertKing offer the latest C_TADM51_70 exam material and high-quality 100-500 pdf questions & answers. Our HP2-K34 VCE testing engine and 000-783 study guide can help you pass the real exam. High-quality 1Z0-511 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-335_exam.html