Exam HP0-Y35 questions and answers

Perhaps you have also seen the related training tools about HP certification HP0-Y35 exam on other websites, but our ITCertKing has a pivotal position in the field of IT certification exam. ITCertKing research materials can 100% guarantee you to pass the exam. With ITCertKing your career will change and you can promote yourself successfully in the IT area. When you select ITCertKing you'll really know that you are ready to pass HP certification HP0-Y35 exam. We not only can help you pass the exam successfully, but also will provide you with a year of free service.

ITCertKing not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service. If you are using our products, we will let you enjoy one year of free updates. So that you can get the latest exam information in time. We will be use the greatest efficiency to service each candidate.

Exam Code: HP0-Y35
Exam Name: HP (Wireless Networks - ASE 2011 Delta Exam)
One year free update, No help, Full refund!
Total Q&A: 75 Questions and Answers
Last Update: 2013-11-29

ITCertKing's training product for HP certification HP0-Y35 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITCertKing's training about HP certification HP0-Y35 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.

Life is full of choices. Selection does not necessarily bring you happiness, but to give you absolute opportunity. Once missed selection can only regret. ITCertKing's HP HP0-Y35 exam training materials are necessary to every IT person. With this materials, all of the problems about the HP HP0-Y35 will be solved. ITCertKing's HP HP0-Y35 exam training materials have wide coverage, and update speed. This is the most comprehensive training materials. With it, all the IT certifications need not fear, because you will pass the exam.

ITCertKing's experienced expert team has developed effective training program a for HP certification HP0-Y35 exam, which is very fit for candidates. ITCertKing provide you the high quality product, which can let you do simulation test before the real HP certification HP0-Y35 exam. So you can take a best preparation for the exam.

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So ITCertKing is not only the best choice for you to participate in the HP certification HP0-Y35 exam, but also the best protection for your success.

HP0-Y35 Free Demo Download: http://www.itcertking.com/HP0-Y35_exam.html

NO.1 Click the Exhibit button.
You have been asked to configure the switching engine of an HP A3000-24G PoE+ Wireless
Switch. First, you log in to the CLI of the access controller and then move to the System view. You
then attempt to issue the partial command oap co and use the Tab key to complete it. However,
the CLI does not complete the command but issues a line return instead, as shown in the exhibit.
What must you do to connect to the CLI of the switching engine?
A. Return to the User view and then issue the command.
B. Enter the OAP view and then issue the command.
C. Use the CTRL+K key combination to access the CLI of the switching engine.
D. Telnet directly to the IPaddress of the switching engine and issue the command.
Answer: A

HP   HP0-Y35   HP0-Y35 demo   HP0-Y35   HP0-Y35 original questions

NO.2 Using HP A5800 switches, which element must be configured in all switches involved in Layer 2
remote port mirroring?
A. remote-mirroring group
B. mirroring-ingress port
C. monitor-egress port
D. remote-probe VLAN
Answer: D

HP dumps   HP0-Y35 questions   HP0-Y35   HP0-Y35 answers real questions

NO.3 What are acceptable topologies for an IRF-Stack? (Select two.)
A. star
B. tree
C. daisy-chain
D. mesh
E. ring
Answer: C,E

HP braindump   HP0-Y35 questions   HP0-Y35 certification training   HP0-Y35   HP0-Y35 exam dumps

NO.4 Click the Exhibit button.
When IRF with Distributed Link Aggregation is implemented at all layers of a LAN (Core,
Aggregation, and Access), which protocols can be replaced by IRF functions? (Select two.)
A. MSTP
B. LACP
C. BFD
D. NSF/GR
E. VRRP
Answer: A,E

HP study guide   HP0-Y35 dumps   HP0-Y35   HP0-Y35   HP0-Y35 dumps

NO.5 Click the Exhibit button.
An IRF-stack is being built using HP A5800 switches, and IRF member 1 will be connected to IRF
member 2 using IRF-port 2. Which IRF-port should it be connected to?
A. 1
B. 2
C. 3
D. any
Answer: A

HP   HP0-Y35   HP0-Y35   HP0-Y35 exam   HP0-Y35 test answers

NO.6 Which sampling mechanisms are available in sFlow in A-Series switches and routers? (Select
two.)
A. packet-based
B. packet-length-based
C. time-based
D. ip-protocol-based
E. ip-source-address-based
F. mac-address-based
Answer: A,C

HP answers real questions   HP0-Y35   HP0-Y35 exam   HP0-Y35

NO.7 After a MAD enabled IRF-stack splits, what happens to the part of the stack that entered Recovery
state?
A. All ports, except for the IRF-ports, BFD enabled ports, and console ports are shut down.
B. All ports, except for the IRF-ports, LACP enabled Link aggregation groups, console ports, and
manually excluded ports are shut down.
C. All ports, except for the IRF-ports, console ports, and manually excluded ports, are shut down.
D. All ports except for manually excluded ports are shut down.
Answer: C

HP   HP0-Y35 test   HP0-Y35 demo   HP0-Y35 pdf   HP0-Y35 test questions

NO.8 Which protocols/technologies can be used to implement IRF MAD? (Select two.)
A. NSF/GR
B. ICMP
C. IGMP
D. BFD
E. LACP
Answer: D,E

HP demo   HP0-Y35   HP0-Y35 exam   HP0-Y35

NO.9 Click the Exhibit button.
You have recently upgraded the Comware of an HP A-Series Access Controller (AC). Prior to
rebooting the device, you issued the dir command to display the contents of the flash root
directory. Upon reboot, the AC does not successfully run the new version of firmware. What is the issue?
A. The device does not have enough memory to run the new firmware.
B. The filename of the firmware is incorrect.
C. The new firmware is not present in the root directory.
D. Thebootware of the device requires updating as well.
Answer: B

HP   HP0-Y35   HP0-Y35 dumps   HP0-Y35 test answers   HP0-Y35 demo   HP0-Y35

NO.10 Which roles are supported by the sFlow standard?
A. agent and collector only
B. probe and collector only
C. agent, collector, and analyzer
D. probe, collector, and analyzer
Answer: A

HP   HP0-Y35   HP0-Y35   HP0-Y35 dumps

NO.11 You have been asked to deploy a guest wireless service within an A-Series solution in the
reception area of a marketing firm. The clients associated with the guest service should be
assigned to VLAN 10. In which view do you assign the VLAN to the wireless service?
A. System view
B. Service Template view
C. VLAN Interface view
D. ESS Interface view
Answer: D

HP braindump   HP0-Y35 answers real questions   HP0-Y35 exam   HP0-Y35

NO.12 In an IRF stack, which operational plane is centralized (in the Master) and which is distributed
(among all members)?
A. Management: centralized
Control: centralized
Forwarding: centralized
B. Management: distributed
Control: distributed
Forwarding: distributed
C. Management: centralized
Control: distributed
Forwarding: distributed
D. Management: distributed
Control: centralized
Forwarding: distributed
E. Management: centralized
Control: centralized
Forwarding: distributed
Answer: E

HP   HP0-Y35 exam simulations   HP0-Y35   HP0-Y35 test questions

NO.13 Given an HP A5800 switch that is in its factory default configuration, what happens after the
following command sequence? (Note: There is no save command.) system-view irf member 1
renumber 2 quit reboot
A. The IRF member ID will be 1.
B. The IRF member ID will be 2.
C. The IRF member ID will be assigned dynamically.
D. The IRF member ID will be "unknown."
Answer: B

HP test questions   HP0-Y35   HP0-Y35   HP0-Y35 test answers

NO.14 You have been asked to deploy an additional HP A-Series wireless access point in the conference room
of an advertising agency. You connect to the CLI of the access controller and create an AP management
template. In which view do you specify the serial number of the access point?
A. Radio view
B. Service Template view
C. AP view
D. ESS Interface view
Answer: C

HP   HP0-Y35 dumps   HP0-Y35

NO.15 Click the Exhibit button.
A network administrator is managing an HP A-Series Wireless Access Controller at the command
line interface (CLI). The administrator issues a command to view the contents of the controller
flash directory. Looking at the output, which access point models can the controller boot and
command to view the contents of the controller? flash directory. Looking at the output, which
access point models can the controller boot and manage? (Select two.)
A. HP WA2220-AG
B. HP WA2612-AGN
C. HP WA2620-AGN
D. HP WA2610E-AGN
E. HP WA2620E-AGN
Answer: B,C

HP questions   HP0-Y35 dumps   HP0-Y35 questions

ITCertKing offer the latest CAT-380 exam material and high-quality 70-684 pdf questions & answers. Our 000-123 VCE testing engine and VCP5-DCV study guide can help you pass the real exam. High-quality HP2-E58 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/HP0-Y35_exam.html