Juniper JN0-643 study guide

The ITCertKing Juniper JN0-643 exam questions is 100% verified and tested. ITCertKing Juniper JN0-643 exam practice questions and answers is the practice test software. In ITCertKing, you will find the best exam preparation material. The material including practice questions and answers. The information we have could give you the opportunity to practice issues, and ultimately achieve your goal that through Juniper JN0-643 exam certification.

Through ITCertKing you can get the latest Juniper certification JN0-643 exam practice questions and answers. Please purchase it earlier, it can help you pass your first time to participate in the Juniper certification JN0-643 exam. Currently, ITCertKing uniquely has the latest Juniper certification JN0-643 exam exam practice questions and answers.

Exam Code: JN0-643
Exam Name: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
One year free update, No help, Full refund!
Total Q&A: 103 Questions and Answers
Last Update: 2013-12-16

Juniper JN0-643 exam is a Technical Specialist exam. Juniper JN0-643 exam can help and promote IT staff have a good career. With a good career, and of course you can create a steady stream of corporate and national interests, so as to promote the development of the national economy. If all of the IT staff can do like this the state will become stronger. ITCertKing Juniper JN0-643 exam training materials can help IT personnel to achieve this purpose. We guarantee you 100% to pass the exam. Make the tough decision to choose our ITCertKing Juniper JN0-643 exam training materials please.

ITCertKing's expert team has developed a latest short-term effective training scheme for Juniper certification JN0-643 exam, which is a 20 hours of training for the candidates of Juniper certification JN0-643 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass Juniper certification JN0-643 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

ITCertKing is a professional website. It focuses on the most advanced Juniper JN0-643 for the majority of candidates. With ITCertKing, you no longer need to worry about the Juniper JN0-643 exam. ITCertKing exam questions have good quality and good service. As long as you choose ITCertKing, ITCertKing will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.

JN0-643 Free Demo Download: http://www.itcertking.com/JN0-643_exam.html

NO.1 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper demo   JN0-643 exam simulations   JN0-643 certification training

NO.2 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper   JN0-643 test   JN0-643   JN0-643 practice test   JN0-643 pdf

NO.3 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper exam dumps   JN0-643   JN0-643   JN0-643 test questions

NO.4 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper   JN0-643 exam prep   JN0-643 exam prep   JN0-643 braindump   JN0-643 test   JN0-643

NO.5 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper test questions   JN0-643 questions   JN0-643

NO.6 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper demo   JN0-643   JN0-643   JN0-643

NO.7 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper   JN0-643   JN0-643   JN0-643 practice test   JN0-643

NO.8 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper braindump   JN0-643   JN0-643   JN0-643

NO.9 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper original questions   JN0-643   JN0-643 test questions   JN0-643

NO.10 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper   JN0-643   JN0-643 test answers   JN0-643   JN0-643

NO.11 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper exam prep   JN0-643   JN0-643

NO.12 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper demo   JN0-643   JN0-643   JN0-643 exam prep

NO.13 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper answers real questions   JN0-643   JN0-643   JN0-643

NO.14 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper   JN0-643   JN0-643   JN0-643 exam dumps   JN0-643

NO.15 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper braindump   JN0-643 answers real questions   JN0-643   JN0-643 exam prep

ITCertKing offer the latest 1Z0-597 exam material and high-quality VCAD510 pdf questions & answers. Our 000-959 VCE testing engine and HP0-J66 study guide can help you pass the real exam. High-quality 700-501 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-643_exam.html